FINALLY, A KYNAR® GRADE FOR SEALS, O-RINGS, AND DIAPHRAGMS
Kynar UltraFlex™ is an elastomeric material based on Arkema's proven PVDF (polyvinylidene fluoride) resin. This unique fluoropolymer exhibits exceptional resistance to chemicals, ozone, ultraviolet light, radiation and moisture. Molding is very similar to many fluoroelastomers without the use of curing agents and molding time is significantly reduced. Post-curing of molded parts improves mechanical properties and chemical resistance.
A unique new technology creates open-celled construction foams that exhibit most of the known properties of Arkema's KYNAR® polyvinylidene fluoride (PVDF) fluoropolymer without the use of blowing agents or melt processing. This method allows the creation of foams with substrates that would otherwise be sensitive to heat or chemicals used in other foaming methods. This composite technology creates properties that are not inherent in open-cell construction polymers.
ACTON TECHNOLOGIES INC. 100 Thompson Street, Pittston, PA 18640 USA Toll Free: 1.800.654.0612 - USA only Phone: 1.570.654.0612 - outside USA Fax: 1.570.654.2810 firstname.lastname@example.orgACTON TECHNOLOGIES LTD Adare, County Limerick, Ireland Phone: +353.61.395.222 Fax: +353.61.395.333 email@example.comACTON TECHNOLOGIES srl Via Mella nº 1, 25062 Concesio (BS), Italy Phone: +39.030.2752447 Fax: +39.030.275939 Italy@actontech.comDaikin-Polyflon™,
Dyneon™ PTFE, Dupont PTFE, Kynar®, Aclar® and Halar® are registered
trademarks of their respective owners. These registered trademarks are
not owned by Acton Technologies. No endorsement, sponsorship or
affiliation between Acton Technologies and these owners is claimed or
implied by their use on this website.