Email - ACTON TECHNOLOGIES INCInquiries
Email Us Today
Call - ACTON TECHNOLOGIES INC1.570.654.0612 Outside USACall - ACTON TECHNOLOGIES INC1.800.654.0612 USA Only
A unique new technology creates open-celled construction foams that exhibit most of the known properties of Arkema's KYNAR® polyvinylidene fluoride (PVDF) fluoropolymer without the use of blowing agents or melt processing. This method allows the creation of foams with substrates that would otherwise be sensitive to heat or chemicals used in other foaming methods. This composite technology creates properties that are not inherent in open-cell construction polymers.

PVDF Foam & Foam Composites
  • Viscoelastic Properties
  • Open-Cell Construction
  • Breathable
  • Does Not Support Combustion
  • Chemically Stable to 250ºC
  • Heat Resistant
  • Uniform Cell Sizing
  • 70 - 90% Free Volume Spacing
  • Fillers Create Composite Structure
  • Transparent to UV Radiation
  • Weatherable and Water Repellent
  • Thermoformable
KYNAR ULTRAFLEX™ foam can be molded or thermoformed into a wide variety of shapes, thicknesses.

Open-cell structure allows for moisture vapor transmission and hydrostatic pressure resistance. Pore size can be adjusted with foam density.

Glass encapsulated in PVDF ULTRAFLEX™ resists bum-through by a propane torch longer than a 1/8" aluminum sheet, while exhibiting virtually no flame or smoke generation.
1 - 2 of 2 | Results Per Page | View | Unit of Measure
1 

Item #

Tensile Strength

Elongation

Maximum Length

Maximum Width

Filler

Add To Cart/Request Quote
Series-1000 N/A 5 to 9 lb/in² N/A 105 % N/A 48 in N/A 24 in N/A Add To Cart
Request Quote
Series-3000 N/A 150 to 275 lb/in² N/A 25 % N/A 48 in N/A 24 in N/A Virgin Fine Glass Fiber Add To Cart
Request Quote
1 - 2 of 2 | Results Per Page | View | Unit of Measure
1 
Follow us on: twitterbloggerlinkedinyoutubeGoogle PlusPrivacy  Catalog Index Site Map Site created by Thomas Web Solutions and powered by Navigator Platform© 2017, ACTON TECHNOLOGIES