Email - ACTON TECHNOLOGIES INCInquiries
Email Us TodayCall - ACTON TECHNOLOGIES INC1.570.654.0612 Outside USACall - ACTON TECHNOLOGIES INC1.800.654.0612 USA Only
Request Information
Calendered Fluoropolymer Films - using premium grades of PTFE skived films, which are then expertly calendered / tensilized, are ideal for applications requiring the utmost in heat resistance, chemical inertness, electrical insulation and anti-stick properties.

High-Performance, Lightweight Next-Generation Films

Using state-of-the-art equipment and technology, Acton designs & produces specialized calendered films tailored for specific applications. The process provides an alternative for engineers and designers seeking lightweight high-performance solutions to problems often associated with skived PTFE film.
Unit of Measure

Performance Properties

Backing Material

 N/A Calendered PTFE film

Backing Thickness

 N/A 0.002 to 0.005 in

Width

 N/A 18 to 24 in

Elongation

 N/A 100 to 200 %

Tensile Strength

 N/A 30 to 75 lb/in

Dielectric Strength

 N/A 10000 to 16000 V

Operating Temperature

 N/A -100 to 500 ºF

Advantages

Advantages

 N/A
  • Higher dielectric strength - better arc resistance
  • Lower elongation
  • Lower porosity - reduced permeability
  • Smoother surface - reduced skive lines
  • High tensile strength
  • Reduced cold flow - less creep
  • Very low moisture absorption
  • Light transmission and transparency

Applications

Applications

 N/A The outstanding properties of PTFE make FluoroCal® Tapes an ideal choice for such applications as dielectric tape, high insulation in electrical components, roll wrapping, composite parts release liner, guide rails, linear bearings and chute liners. FluoroCal® with a silicone adhesive also offers the greatest flexibility in application due to its broad temperature and chemical resistance.
  • P / S tape backing
  • Metallized microwave antennas
  • High frequency "HF" microwave printed circuit substrates
  • Flexible liner for transfer systems
  • Seal & gasket designs where low creep is required
  • Tank liner where film can be welded to create needed shapes
  • Containers for chemicals used in the semiconductor industry where high purity is required
  • Pharmaceutical packaging/lamination

Note

Note

 N/A For information on your application using Calendering Fluoropolymer Films.

Performance Properties are typical and are not intended for writing specifications. ACTON is available to develop specifications to suit your individual needs.

The statements, technical information and recommendations contained herein are believed to be accurate as of the time of printing. No warranty of fitness for any purpose, or any other warranty either expressed or implied, is made concerning the materials described herein. The user must thoroughly test the product prior to commercialization. No information provided can be used to develop patents, and the user is advised to take the appropriate steps to assure that this product will not result in patent infringement.
Follow us on: twitterbloggerlinkedinyoutubeGoogle PlusPrivacy  Catalog Index Site Map Site created by Thomas Web Solutions and powered by Navigator Platform© 2017, ACTON TECHNOLOGIES