ACTON TECHNOLOGIES INC.
100 Thompson Street
Pittston, Pennsylvania 18640 USA
Tel: 1.800.654.0612 - USA only
Phone: 1.570.654.0612 - outside USA
Fax: 1.570.654.2810
Email: Inquiries@actontech.com
Website: www.actontech.com
Print Back
A unique new technology creates open-celled construction foams that exhibit most of the known properties of Arkema's KYNAR® polyvinylidene fluoride (PVDF) fluoropolymer without the use of blowing agents or melt processing.
  • Low smoke and toxicity generation
  • Direct Flame Penetration Resistance
  • Viscoelastic
  • Open Celled Construction
  • Not affected by UV or Radiation
  • Weatherable
  • Water Repellent
  • Broad Chemical Resistance
  • Glass Fiber Filled
  • Available with acrylic adhesive and foil backing
All values for reference only, not to be used for specifications.
Unit of Measure

Specifications

Durometer Hardness

 N/A 70 Shore OO

Foam Firmness

 N/A 8 to 10 Firmness Rating Scale

Tensile Strength

 N/A 150 to 275 lb/in²

Elongation

 N/A 25 %

Maximum Length

 N/A 48 in

Maximum Width

 N/A 24 in

Minimum Thickness

 N/A 3/32 in

Maximum Thickness

 N/A 1-1/2 in

Minimum Density

 N/A 8.5 lb/ft³

Maximum Density

 N/A 25.5 lb/ft³

Minimum Air Space

 N/A 70 %

Maximum Air Space

 N/A 92 %

Minimum Temperature

 N/A -15 ºF

Maximum Temperature

 N/A 620 ºF

Compression 25% Deflection

 N/A 3.5

Compression 50% Deflection

 N/A 5.5

Compression Recovery

 N/A 14 %

Compressibility

 N/A 56 %

Backing

 N/A None

Filler

 N/A Virgin Fine Glass Fiber

Color

 N/A White

Chemical Resistance

Chemical Resistance

 N/A Kynar® resins demonstrate excellent resistance to an extensive array of chemicals. They resist attack from most inorganic acids and alkalis, aliphatic and aromatic hydrocarbons, organic acids, alcohols and halogenated solvents. However, strong alkalis (i.e. pH >12) and strong polar solvents such as acetone, ethyl acetate, dimethylformamide and dimethyiacetamide can impede the effectiveness of Kynar® resins. Foam performance may be slightly lower to solid performance but will have a comparative effect. Fillers may change chemical resistance properties.

Note

Note

 N/A For information on your application, please contact the exclusive fabricator of KYNAR ULTRAFLEX™ foams:

The statements, technical information and recommendations contained herein are believed to be accurate as of the time of printing. No warrantee of fitness for any purpose, or any other warrantee either expressed or implied, is made concerning the materials described herein. The user must thoroughly test the product prior to commercialization. No information provided can be used to develop patents, and the user is advised to take the appropriate steps to assure that this product will not result in patent infringement.